GM - Automatic

GM 6L50E 6-Speed Auto (Camaro V6 / CTS / lighter vehicles) gear ratios

The GM 6L50E 6-Speed Auto (Camaro V6 / CTS / lighter vehicles) is a six-speed automatic.

First gear is 4.06:1 and 6th is 0.67:1. Divide one by the other and the overall spread is 6.06:1. That is a very wide spread. With six gears to share it out, the steps in the middle can still stay civil.

6th is an overdrive at 0.67:1: the output shaft turns faster than the input shaft. Two of the six gears are overdrives. No gear is exactly 1.00:1, so there is no direct drive.

The biggest step is 1st to 2nd, where the ratio drops 42%. The smallest is 5th to 6th at 21%. A drop that size lands the engine well down the rev range after the change, so it pays to know where the torque lives.

The final drive lives in a separate diff, so the speed table shows three common ratios: 3.42, 3.73 and 4.10. With a 3.73 final drive and 225/45R17 tyres, 6th at 6,000 rpm works out at 287 km/h (178 mph), and first runs out at 47 km/h (29 mph). That is how tall the gear is, not a top speed. Drag and power decide that. At 70 mph in 6th the engine turns about 2,350 rpm.

Ratios

GM 6L50E 6-Speed Auto (Camaro V6 / CTS / lighter vehicles): ratio per gear, and how far the ratio drops from the gear before.
GearRatioStep
1st4.06:1-
2nd2.37:141.6%
3rd1.55:134.6%
4th1.16:125.2%
5th0.85:126.7%
6th0.67:121.2%

Road speed at 6,000 rpm

Road speed at 6,000 rpm on a 225/45R17 tyre (1.993 m rolling circumference), by final drive. No slip, no drivetrain losses.
Gear3.42 final drive3.73 final drive4.10 final drive
1st52 km/h 32 mph47 km/h 29 mph43 km/h 27 mph
2nd89 km/h 55 mph81 km/h 50 mph74 km/h 46 mph
3rd135 km/h 84 mph124 km/h 77 mph113 km/h 70 mph
4th181 km/h 112 mph166 km/h 103 mph151 km/h 94 mph
5th247 km/h 153 mph226 km/h 141 mph206 km/h 128 mph
6th313 km/h 195 mph287 km/h 178 mph261 km/h 162 mph

Closest gearboxes by spread

Source: GM Media Chevrolet newsroom

Results are theoretical: stock ratio specs, your inputs, no drivetrain losses. Verify with your drivetrain supplier before spending real money.

Swapping the engine as well? StandaloneHQ counts the inputs and outputs the new engine needs and shortlists the wire-in ECUs that fit: ECU Pinout Planner.

All gearboxes