Porsche

Porsche 6-Speed Manual Transaxle (997.2 Carrera) gear ratios

The Porsche 6-Speed Manual Transaxle (997.2 Carrera) is a six-speed manual transaxle.

First gear is 3.91:1 and 6th is 0.88:1. Divide one by the other and the overall spread is 4.44:1. That is a wide spread: a short first to get the car moving and a tall top to bring cruise revs down.

6th is an overdrive at 0.88:1: the output shaft turns faster than the input shaft. No gear is exactly 1.00:1, so there is no direct drive.

The biggest step is 1st to 2nd, where the ratio drops 41%. The smallest is 4th to 5th at 16%. A drop that size lands the engine well down the rev range after the change, so it pays to know where the torque lives.

It is a transaxle, so the final drive sits in the same case: 3.44:1 as listed here. The speed table uses that figure and nothing else. With a 3.44 final drive and 225/45R17 tyres, 6th at 6,000 rpm works out at 237 km/h (147 mph), and first runs out at 53 km/h (33 mph). At 70 mph in 6th the engine turns about 2,850 rpm.

Ratios

Porsche 6-Speed Manual Transaxle (997.2 Carrera): ratio per gear, and how far the ratio drops from the gear before.
GearRatioStep
1st3.91:1-
2nd2.32:140.7%
3rd1.56:132.8%
4th1.28:117.9%
5th1.08:115.6%
6th0.88:118.5%
Final drive3.44:1

Road speed at 6,000 rpm

Road speed at 6,000 rpm on a 225/45R17 tyre (1.993 m rolling circumference), with the listed 3.44 final drive. No slip, no drivetrain losses.
Gear3.44 final drive
1st53 km/h 33 mph
2nd90 km/h 56 mph
3rd134 km/h 83 mph
4th163 km/h 101 mph
5th193 km/h 120 mph
6th237 km/h 147 mph

Closest gearboxes by spread

Source: Porsche Cars North America 2011 911 Carrera specifications

Results are theoretical: stock ratio specs, your inputs, no drivetrain losses. Verify with your drivetrain supplier before spending real money.

Swapping the engine as well? StandaloneHQ counts the inputs and outputs the new engine needs and shortlists the wire-in ECUs that fit: ECU Pinout Planner.

All gearboxes