Mitsubishi

Mitsubishi W5M6A 5-Speed (Evo X GSR) gear ratios

The Mitsubishi W5M6A 5-Speed (Evo X GSR) is a five-speed manual gearbox.

First gear is 2.857:1 and 5th is 0.761:1. Divide one by the other and the overall spread is 3.75:1. That is a middling spread for a five-speed: enough first gear to leave a junction without drama, and a top gear that is not only for motorways.

5th is an overdrive at 0.761:1: the output shaft turns faster than the input shaft. No gear is exactly 1.00:1, so there is no direct drive.

The biggest step is 1st to 2nd, where the ratio drops 32%. The smallest is 3rd to 4th at 24%. On each upshift the revs drop by the same percentage as the ratio.

The final drive lives in a separate diff, so the speed table shows three common ratios: 3.42, 3.73 and 4.10. With a 3.73 final drive and 225/45R17 tyres, 5th at 6,000 rpm works out at 253 km/h (157 mph), and first runs out at 67 km/h (42 mph). That is how tall the gear is, not a top speed. Drag and power decide that. At 70 mph in 5th the engine turns about 2,670 rpm.

Ratios

Mitsubishi W5M6A 5-Speed (Evo X GSR): ratio per gear, and how far the ratio drops from the gear before.
GearRatioStep
1st2.857:1-
2nd1.95:131.7%
3rd1.444:125.9%
4th1.096:124.1%
5th0.761:130.6%

Road speed at 6,000 rpm

Road speed at 6,000 rpm on a 225/45R17 tyre (1.993 m rolling circumference), by final drive. No slip, no drivetrain losses.
Gear3.42 final drive3.73 final drive4.10 final drive
1st73 km/h 46 mph67 km/h 42 mph61 km/h 38 mph
2nd108 km/h 67 mph99 km/h 61 mph90 km/h 56 mph
3rd145 km/h 90 mph133 km/h 83 mph121 km/h 75 mph
4th191 km/h 119 mph175 km/h 109 mph160 km/h 99 mph
5th276 km/h 171 mph253 km/h 157 mph230 km/h 143 mph

Closest gearboxes by spread

Source: Mitsubishi 2013 Lancer Evolution Press Kit

Results are theoretical: stock ratio specs, your inputs, no drivetrain losses. Verify with your drivetrain supplier before spending real money.

Swapping the engine as well? StandaloneHQ counts the inputs and outputs the new engine needs and shortlists the wire-in ECUs that fit: ECU Pinout Planner.

All gearboxes