GM - Automatic

GM 700R4 / 4L60E / 4L65E 4-Speed Auto (identical ratios) gear ratios

The GM 700R4 / 4L60E / 4L65E 4-Speed Auto (identical ratios) is a four-speed automatic.

First gear is 3.06:1 and 4th is 0.70:1. Divide one by the other and the overall spread is 4.37:1. That is a wide spread: a short first to get the car moving and a tall top to bring cruise revs down.

4th is an overdrive at 0.70:1: the output shaft turns faster than the input shaft. 3rd is direct drive at 1.00:1.

The biggest step is 1st to 2nd, where the ratio drops 47%. The smallest is 3rd to 4th at 30%. A drop that size lands the engine well down the rev range after the change, so it pays to know where the torque lives.

The final drive lives in a separate diff, so the speed table shows three common ratios: 3.42, 3.73 and 4.10. With a 3.73 final drive and 225/45R17 tyres, 4th at 6,000 rpm works out at 275 km/h (171 mph), and first runs out at 63 km/h (39 mph). That is how tall the gear is, not a top speed. Drag and power decide that. At 70 mph in 4th the engine turns about 2,460 rpm.

Ratios

GM 700R4 / 4L60E / 4L65E 4-Speed Auto (identical ratios): ratio per gear, and how far the ratio drops from the gear before.
GearRatioStep
1st3.06:1-
2nd1.63:146.7%
3rd1.00:138.7%
4th0.70:130.0%

Road speed at 6,000 rpm

Road speed at 6,000 rpm on a 225/45R17 tyre (1.993 m rolling circumference), by final drive. No slip, no drivetrain losses.
Gear3.42 final drive3.73 final drive4.10 final drive
1st69 km/h 43 mph63 km/h 39 mph57 km/h 36 mph
2nd129 km/h 80 mph118 km/h 73 mph107 km/h 67 mph
3rd210 km/h 130 mph192 km/h 120 mph175 km/h 109 mph
4th300 km/h 186 mph275 km/h 171 mph250 km/h 155 mph

Closest gearboxes by spread

Source: Chevrolet Performance document (Sheet 3 of 11)

Results are theoretical: stock ratio specs, your inputs, no drivetrain losses. Verify with your drivetrain supplier before spending real money.

Swapping the engine as well? StandaloneHQ counts the inputs and outputs the new engine needs and shortlists the wire-in ECUs that fit: ECU Pinout Planner.

All gearboxes